This light gun maximizes the efficiency of applications involving ultraviolet light curing adhesives and materials. Designed for exposing small areas of UV adhesives in bonding applications such as fiber optic connections, electro-optics, lens assembly, PC board coatings, wire tacking and more. The time required for a typical bonding can be reduced from 15 minutes to a matter of a few seconds. Features a halogen lamp with a minimum output of 25 mW/cm² in the 340-380nm range at a 1" distance. First trigger pull turns the unit on and audible tones will occur every 10 seconds untial a second trigger pull turns it off. Bulb life is over 100,000 twenty-second curing cycles. The light is focused into an 84mm long curved tip fiber optic light guide, 11mm in diameter (replacement light guide is #57-471). Probe end should not come in contact with adhesive. Emits a safe, cool beam of UV light (250-400nm range). Environmentally protected housing, thermal overload protection, and filtered to block energy outside UV range. Includes power supply and gun-mounted holder.

Note: Avoid direct skin contact and use suitable UV protective eyewear when operating curing gun.

商品名称

 
Halogen UV Curing Gun, 120V, 60Hz. 
RoHS Not Compliant 
 
Halogen UV Curing Gun, 220V, 50Hz. 
RoHS Not Compliant 
 
LED UV Curing Gun