Pliers

 Fine-Serrated Jaw for Good Clamping Grip
  Ideal for Gripping and Looping Wire
  Great for Tight Spaces

The NP1 is an essential electronics tool. With its fine-serrated jaw, the NP1 provides a good clamping grip and is ideal for gripping and looping wire. These needle nose pliers are best used in tight spaces.

Wire Cutters

  Low-Profile General Purpose Cutter
  Superior Blade Bypass Shear Cutting Action
  Greatly Reduces Mechanical Shock
  Flush Cuts Soft Wire up to 20 AWG

These cutters are designed for cutting soft wire up to 20 AWG. Although mainly aimed at electrical wires, the tool is perfectly suited for cutting optical fiber to length (but does not replace an actual cleaving tool, see XL410 or S90W)

Wire Strippers

WS16-Red Handle  Ideal for Cutting, Stripping, and Looping Wire
  Strips Wire Between 16 AWG and 26 AWG (1.0 to 0.14 mm²)
  Spring-Loaded for Self- Opening

WS10-Yellow Handle
  Ideal for Cutting, Stripping, and Looping Wire
  Strips Wire Between 10 AWG and 18 AWG (4.0 to 0.75 mm²)
  Spring-Loaded for Self-Opening

Wire strippers provide a safe way of removing the outer layers of wires and cables. A series of slots with different gap sizes ensures that the inner wire or fiber isn't damaged. Although designed for electrical wires, the tool is well suited for stripping the jacket and furcation tubing off fibers.

Trim Pot Adjuster

 Equipped with One Recessed Blade to Assist Consistent Adjustment
  Features One Offset Blade for Harder-to-reach Adjustments