Features

• Compact Footprint 60 x 60 x 47mm (2.4" x 2.4" x 1.8")
• Differential Encoder Feedback (QEP Inputs) for Closed Loop Positioning
• Auto-Configure Function for all Thorlabs Z6 Equipped Stages/Actuators
• USB Plug-and-Play - Multi-axis Expansion
• Easy to Use Manual Controls with Velocity Slider and Jog Buttons
• Full Software Control Suite Supplied
• Extensive ActiveX® Programming Interfaces
• Fully Software Integrated with Other apt™ Family Controllers

The new T-Cube apt^TM USB DC Driver (TDC001) is a very compact single channel DC servo controller/driver for easy manual and automatic control of DC Servo motors. This driver has been designed to operate with a variety of lower powered DC brushed motors (up to 15V/2.5W operation) equipped with encoder feedback. The TDC001 has been optimized for 'out of the box' operation with the Thorlabs range of Z6 DC motor equipped opto-mechanical products (see Related Items tab).  In addition, the highly flexible software settings and closed loop tuning also supports operation with a wide range of third party DC Servo motors and associated stages and actuators.

For convenience the footprint of this unit has been kept to a minimum, 60 x 60 x 47mm (2.4" x 2.4" x 1.8").  This unit may be mounted directly to the optical table closer to the motorized system for added convenience when manually adjusting motor positions using the front panel controls. Table top operation also allows minimal drive cable lengths for easier cable management.

USB connectivity provides easy 'Plug and Play' PC controlled operation.  The TDC001 also includes the very user friendly apt™ software which allows the user to quickly set up complex move sequences.  For example, all relevant operating parameters are set automatically by the software for Thorlabs stage and actuator products. Advanced custom motion control applications and sequences are also possible using the extensive ActiveX® programming environment described in more detail on the Software and Video Tutorials tabs.

For added convenience, multiple units can be connected to a single PC via standard USB hub technology or by using the new T-Cube Controller Hub (TCH001) for multi-axis motion control applications.